More Info

Application of the teak:

Step 1: Prepare the surface. 

If necessary, sand surface flat to have no lumps and bumps to allow as much surface area as possible for the adhesive.

In a room temperature environment use Alcohol or Methylated sprits to clean the surface thoroughly, removing all dirt, oil and grime. Make sure the surface it is dry and free of debris.

Step 2: Placement and Application.

If you need to flatten the teak if it has warped a bit, with a spray bottle, Lightly mist the teak with water and wipe to spread the water. Allow a few minutes for the humidity to flatten the teak.

Without removing the adhesive backing, lay the teak down to test and see alignment.

Pull the backing back on one corner or side, lay the teak down and align without touching the adhesive. Once perfectly aligned, press down the open corner of or side with pressure. Continue to peel back the remaining of the backing, slowly pull and stick the teak down as you go.

The adhesive is pressure activated, using the backing in your hand to help slide around the teak, apply solid pressure to all edges and corners for 5 seconds.

Step 3: After care

Resealing is needed once a year or when required. This will help with protecting the teak from the elements giving longevity of quality.

Wash with soap and water and allow to dry. Lightly sand with P320 or higher and wipe. Apply starbrite.com/collections/teak-oils-sealers.

Step 4: Media

Could you please take pictures or a video of the teak out in the wild for me, I would like to make a post with it. A post from you with a collaboration to the post or tag would be amazing too. @teaken.teak.

If you have a free minute, please click the link and write me a quick Google review with a pic. Teaken google review. I would really appreciate all of this.

Removal - If needed.

Tape boarders of the teak with masking tape for protection. With a heat gun slowly warm the teak and adhesive to soften. With a soft plastic scraper, peel up the teak bit by bit until off. Be carful not to damage the surface with scraper! Clean remaining adhesive with turpentine. 

More Info.

Teaken real Teak wood panels with 3M peel and stick adhesive, the first of their kind!                                                                                                                                                    Laser cut and engraved, crafted from super-yacht grade teak, eco composite sheet, industrial-grade low and high surface-energy 3M adhesive and finished with Starbrite teak sealer with polymers to even further protect the teak form UV rays and harsh weather conditions. Flexible, bendable, tough and high wear resistant's.                                                                                                                                                                                            For all teak application you can think of, steps, floor pads, rails, names, gunnel tops, deck tops, dashes, bulkheads/walls/bulwarks/deckheads, etc). We can work and get creative together to enhance your already great product!                                                                                                                                                                                                                  My material is extremely versatile, perfect for Bespoke designs to give a personal touch to any surface. My teak is the ultimate accessory for caravans, yachts, boats and marine craft. The teak is durable, reliable, and has a luxury feel and look.